While we do carry Hinges # LC95VR, Latches # 295-000019, Gaskets # CS94VR and other parts for trailer doors we do not carry entire door assemblies. Based on your dimensions you will likely need to have a custom door built which you may be able to have done at a local trailer manufacturer in your area. view full answer...
Based on images I could find of Lark enclosed trailers with a double rear door it looks like you are going to need the Kit # PLR258-002. This will give you the mounts, handle, and catches for your trailer but you will need to source the 3/4" steel pipe and hardware needed locally and have the handle and cams welded to the pipe.
If you have something different from this type of setup please send me your images and dimensions for the parts you are looking to replace. view full answer...
Unfortunately Eugene, the door itself is not going to be something you can replace. You're going to need to replace the entire receptacle with the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 or the CR Brophy Replacement 7-Pole, Trailer Connector Socket # R7CB if you just have a 7 way. view full answer...
Hey Perry, so due to the door style that is at the rear of a 2023 Mercedes Sprinter the Inno tilt cargo carrier part # IN94MR wouldn't allow the door to open as it would sit up too tall even folded down but I do have a similar solution that would work.
You would need a carrier that swings away from the rear of the vehicle like the Yakima EXO part # Y62VR which would allow the rear door to open without interference. view full answer...
Welcome back! I have a couple of options for a wiring harness but it depends on what model your 2010 Subaru Impreza is. From what I can tell the Outback Sport model is a hatchback so if that's the case you'll need the 5-Door Wagon option but wanted to list both.
Sedan - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 56061
5-Door Wagon - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C56111 view full answer...
Hey Thomas, yeah you could install and use the Access Door for RVs part # 37210-31015 the way you described and it would work well. It is waterproof so in the future it wouldn't leak either. view full answer...
Hey Jan, to locate the Torklift Generator carrier part # TLA7752 off-center in front of only one of the doors would require finding a welder/fabricator in your area who could add an additional hitch opening off to the side. This is such a rare request there isn't a product available for this specific application. view full answer...
The Bauer Products Motorhome Door Lock 402-112-000 # BA64FR has 1/4" diameter pins with 1/2" diameter on the ends of the pins. If this was not the pin size you needed please let me know as I did not see any pictures attached. view full answer...
Thanks for the photos and details Darcey!
The lock you're looking for is the Bauer Products Motorhome Door Lock # BA64FR which fits a cutout of 5-1/4" wide x 4-1/2" tall. It uses the same type of dual lock and bolts like what your have on your lock as well.
Attached is a video for your reference - let me know if you have any other questions! view full answer...
Hey Jared, the Yakima Backswing bike rack part # Y02465 that you referenced does have the needed clearance to allow the rear door of your 2008 Dodge Sprinter to open. It has a distance of 15 inches from it's hitch pin hole to the back of the bike rack mast which is more than enough. view full answer...
Eric, the Lippert Patio Upgrade Kit for Toy Hauler Garage Doors # LC27FR weighs 116 lbs; but for the railing kit, we do not have those parts, unfortunately. view full answer...
Hey Luke,
Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts:
- Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
- Rhino-Rack 2500 Series Legs # RRRLKVA
- Custom DK Fit Kit # DK152
This will have all the parts needed and give you a rack with both crossbars so you can haul your gear. view full answer...
HI Mason; thanks for writing in, though the only color the Multi-Purpose Access Door w/ Lock # 372E8102-A comes in is White. That said, it is designed to be painted if need be, so getting a coat of black paint on it is something you can do pretty easily. view full answer...
Hey Kristopher,
Replacement parts for the Everchill RV Refrigerator w/ Freezer # 324-000119 will have to purchased through the manufacturer. Everchill recently sold to Lippert Components so if you give them a call they should be able to hook you up with the correct bins. view full answer...
Hey Robert, thanks for the picture. It looks like the exact hatch is the part # D04-0471BKVP which may be slightly modified. I would attach the picture you sent in but it looks like maybe it was from a video that might have been copyrighted. view full answer...
Since you haven't bought the 2023 Kia Carnival yet and you are still in the shopping phase you should definitely go with one that has raised roof rails so you can install a roof rack like the Rhino Rack part numbers # RRVA137B-2 and # RRSX100 as there aren't any solutions for the naked roof configurations. view full answer...
To be able to run the same 5 on 5-1/2" bolt pattern for your Jeep Wrangler on the M105A2 trailer you are going to have to cut off your current spindles to have 2 Spindles # TRU77FR installed. This is the common size spindle found on a 3,500lb axle which will then let you install 2 of the Hub/Drums # AKHD-555-35-EZ-K. With these you will want to install Electric Brakes # 23-468-469 since they are much better on an Overlanding trailer than surge type brakes. We do have a Junction Box # 3430001-JBK... view full answer...
Thanks for all of the info, Arby!
For your application I recommend using the SeaSucker Monkey Bars Roof Rack # 298-SX6000B along with the Inno Ridge Rooftop Cargo Box # INBRA220R-BK.
The Monkey Bar system uses powerful vacuum cups to secure to your hard top roof and provides round crossbars for the Inno Ridge to connect to. This roof rack kit is the only thing that will work for your vehicle, but even with that being the case this is a solid roof rack solution that I have no issues recommendin... view full answer...
Hi Rick,
Manufacturers don't have a parts list available to determine the correct replacement light so I'll need to see some pictures of the light and some dimensions in order to find the correct fit. view full answer...
Hey Bruce,
The Replacement Cover for Pace Edwards JackRabbit Hard Tonneau Cover # PE48UV is exactly what you need for the Jackrabbit TR2105 cover on your 2015 Ford F-150 5-1/2' bed. view full answer...